Battery socket getting voltage after removing recharging circuit

[littlecharlie]

I have a mv1a board, and i have removed D1, D2 and R10, so that I can use a CR2032 no rechargeable battery.
As per the image here

http://www.jamma-nation-x.com/jammax/images/tuts/mv1ax-charge.jpg

But when i turn on the board, the positive of the socket gets around 3.3 V (without any battery inserted in the socket). Shouldn't it be 0v? I'm worried that, if I place a battery, it will fry.

I've check D4 with a multimeter (to see if it lets voltage through) but apparently it's in good condition.

 

[maki]

Thats just leakage current that causes voltage to be present, common and it won't damage anything.

 

[littlecharlie]

Good to know it's common.
Thanks