zed7
n00b
- Joined
- May 9, 2020
- Posts
- 42
Hi all, I finally decided to take a crack at my Neo Geo's convergence.
Prior to me tinkering:
Magenta/Green all over was off, as well as terrible corner convergence.
Currently:
I have fixed most of the Magenta/Green, but the bottom half of the screen still has it off a decent amount.
I have not touched Corner Convergence, as I will wait to do that outside of the cabinet, and when the static convergence is fixed.
I have attached a photo of the whole screen on crosshatch.
My question is, how shall I continue static adjustment?
Would it be best to restart, with them in the 10-2 positions as the K7000 manual suggests?
I am mainly lost because it's only half the screen, instead of the entirety.
Prior to me tinkering:
Magenta/Green all over was off, as well as terrible corner convergence.
Currently:
I have fixed most of the Magenta/Green, but the bottom half of the screen still has it off a decent amount.
I have not touched Corner Convergence, as I will wait to do that outside of the cabinet, and when the static convergence is fixed.
I have attached a photo of the whole screen on crosshatch.
My question is, how shall I continue static adjustment?
Would it be best to restart, with them in the 10-2 positions as the K7000 manual suggests?
I am mainly lost because it's only half the screen, instead of the entirety.