darknezz19
n00b
- Joined
- Oct 13, 2014
- Posts
- 49
Hi people. Have this old Toshiba TV Chassis used in an old MAME cab that has since been restored to original hardware. This TV has a crappy picture and thought it would be a good candidate to try and feed RGB into the OSD IC like Michael Moffitt describes on his website
So far I've identified the OSD IC under an RF shield. It appears to infant have RGB outputs as well as the blanking pin
that will be tied to presumably 5v to get the whole picture to fill the screen.
So right now it's kinda late and just debating on what console would be easiest to feed RGB from just as a test setup. Maybe a model 1 Genesis as I already have one apart.
Anyway just thought a live walk through of this might be useful for others in either case of the outcome. Maybe some of you have already done this and have some input or tips on the subject. Apparently it isn't always as easy as it seems
but we will try and see what happens.
So far I've identified the OSD IC under an RF shield. It appears to infant have RGB outputs as well as the blanking pin
that will be tied to presumably 5v to get the whole picture to fill the screen.
So right now it's kinda late and just debating on what console would be easiest to feed RGB from just as a test setup. Maybe a model 1 Genesis as I already have one apart.
Anyway just thought a live walk through of this might be useful for others in either case of the outcome. Maybe some of you have already done this and have some input or tips on the subject. Apparently it isn't always as easy as it seems
but we will try and see what happens.