MVS>AES converter shells (Phantom-1, Fusion)

avramce

Kabuki Klasher
Joined
Sep 24, 2019
Posts
125
Hi all, I modeled a shell for the Furrtek Fusion and the !Arcade! Phantom-1 if anyone is interested. The fusion one is dead simple, and maybe I'll revise it later, but I'm still hammering out the internals of my Phantom-1 case if anyone is interested in that (had to dremel and shave some tolerances in its current state)

Fusion is currently up on Thingiverse: https://www.thingiverse.com/thing:3969205

Phantom-1 is currently a WIP:
https://imgur.com/a/1D5GyLd
 

GohanX

Horrible Goose
20 Year Member
Joined
Sep 28, 2001
Posts
12,490
This is cool, I might see if I can get someone to print one of these for me.
 

avramce

Kabuki Klasher
Joined
Sep 24, 2019
Posts
125
Thanks Gohan, the fusion shell is super helpful in dealing with a death-grip connector, alot easier to insert and pull off if you have a solid grip.
 

neo-ced

New Challenger
Joined
May 6, 2004
Posts
65
nice, my Phantom case is just an old cut of a loose dead AES ^^
 
Top