Neo Geo Analogue Scart Cable Replacement

Badboy1980

Cheng's Errand Boy
Joined
Aug 11, 2012
Posts
115
Hi All,

I have a Neo Geo CMVS Analogue. Unfortunately the SCART cable has been damaged. Does anyone know where I can purchase a replacement? I have asked Analogue directly but they said they don't have any in stock and no longer make them. Thanks in advance.
 

wyo

Warrior of the Innanet
10 Year Member
Joined
May 22, 2013
Posts
12,176
If it has an 8-pin DIN connector it's the same pinout as the AES.
 

Neo Alec

Legendary Member?
25 Year Member
Joined
Dec 7, 2000
Posts
14,470

promking

Morden's Lackey
Joined
Feb 18, 2013
Posts
364
Or retro gaming cables!
 

TheMagicianLord

The Ultimate 11
Joined
Jun 8, 2019
Posts
226
This unit has that odd 13 pin DIN like the first link Neo Alec posted? Could Analogue at least tell you the specific name of the connector or have their engineers provide a Digikey/Mouser link? If you could get hold of the connector, then you could perhaps make one, or have someone else make one. Other than that, it's probably going to be impossible to find. I suppose another more invasive alternative would be to open the unit up and replace the 13 pin DIN with a standard 8 pin Neo Geo jack, but of course you'd lose s-video and stereo audio capability. Tough situation, hope you find a solution.

Edit: not sure if this is the same connector or not, but maybe Analogue can verify:

 
Last edited:

Neo Alec

Legendary Member?
25 Year Member
Joined
Dec 7, 2000
Posts
14,470
If you have the tian feng replacement AV board, that one just uses a regular Genesis/MD2 cable.
 

Neo Alec

Legendary Member?
25 Year Member
Joined
Dec 7, 2000
Posts
14,470
Oh wait, this topic is about the Analogue wood CMVS? I was replying about the Omega MVS. Sorry.
 
Top