SEGA JVS <> JAMMA 838-13683-02 [6 buttons/kick harness HELP]

[Macck]

Hi guys,

I've receive today a Sega JVS to JAMMA part number 838-13683-02

http://www.tms-designs.com/theshed/default.asp?stockid=1854

Someone can guide me where can i get the kick harness to play games with 6 buttons like MvsC2?

It's right use the CN3? Are correct that sequence shown in the link above?

Thanks in advanced

[]'Macck

 

[Lemony Vengeance]

it's on the left, the 14 pin connector. the pinout is on the top side of this illustration:

 

[Macck]

Thank you !!!

[]'Macck

 

[codecrank]

There is a catch here though. The diagram lem provides is for the rev A i/o . Rev B outputs buttons 4/5/6 instead of 6/7/8.

 

[Lemony Vengeance]

The diagram was from his initial post. I have explained what's needed in a pm to him, but for everyone else, here goes.

The Sega IO ver. A sends the first two kick buttons over jamma (pins 25 & 26), with the remaining buttons over the headers I outlined earlier.

That's why most arcade guys use the Capcom IO OR the ver. B Sega IO. No weird button configurations that way.

 

[mitchbrain]

So to plug this IO board into a Blast city IO do I use the 10 pin CN 6 like in the wiring diagram or 8 pin CN 8?