I'm myself definitely interested in getting a couple of them. And not only for CPS3....
Question, Second Impact carts work with a dead battery don't they? Ie: it doesn't suicide when the battery dies?
When you find out let us know! Also, let us know where to order them. Thx!!
Thankya!Hey, I got an email from Codesrc last night informing me that SCSI2SD boards are now available through his new manufacturer:
http://imall.iteadstudio.com/scsi2sd.html
Hey, I got an email from Codesrc last night informing me that SCSI2SD boards are now available through his new manufacturer:
http://imall.iteadstudio.com/scsi2sd.html
thx kuze, ordered one.
NP. If you plan to use it for CPS3, you will need to connect it to your PC first to use the configuration utility, which will let you set it to CD mode and the size to 700mb. You then can write your CPS3 iso to a micro SD card with 'dd', then insert the card in the scsi2sd board and try it out.
Yeah, I read the wiki a lil bit the other day. Have you tried the Multi-ISO on this setup yet? I assume it will work regardless anyway.
Hey, I got an email from Codesrc last night informing me that SCSI2SD boards are now available through his new manufacturer:
http://imall.iteadstudio.com/scsi2sd.html
Got mine in. Two questions:
I assume it automatically saves the setting in the utility tool when you change them? There is no "apply changes" button or anything.I'm
Also, who wants to tell me how to use DD to write the card? I tried using Winhex's clonedisk function like I do for arcade CF cards but when I boot the CPS3 it says incorrect CD. (I know it's the correct ISO I'm using)
EDIT: I DON'T HAVE LINUX
You could install Linux in a VM. Virtual box is free. Or run it from a live CD.
I'll look into that. It seems like its command line type stuff so how would I type that out for this?
Sorry can't really help you there. You could try using something like this
Yeah use systemrescuecd, boot in and mount your drive with the cps3 iso on it. Then from directory with cps3.iso type # dd if=cps3.iso of=/dev/sdx where sdx is replaced by your SD device (scsi2sd NOT hooked up, just your SD card reader) as recognized by the system.
Also in the scsi2sd util program you do have to save your changes. It takes like 20 seconds to update the device and save the changes.
Most likely your cart slot or cart connector is dirty. It is one I converted so I know it was working when it left here. Try re-seating it several times. The cart slots on these are garbage.
Well ill be a monkey's uncle, it worked. Much thanks. However its asking me to rewrite the game, is this what I need to do?