Hine62
Krauser's Shoe Shiner
- Joined
- Jul 15, 2005
- Posts
- 230
Hey guys I have a 4 slot mvs that will boot to hatch screen with just the bottom board. It will also get to the menu for setting the date and such. I don't think the memory can be cleared because the top board is not attached.
The problem is it won't boot to hatch screen when the top board is attached. I get a screen with garbage graphics in squares. I've looked up the calendar error and checked the power to the top board. The power is only 4.3v, is this too low? It should be 5v.
The battery has been removed and I've checked the traces which were fine. Could the 32.768 crystal be dead? But why would the bottom board boot, but not with the top?
Thanks for your help.
Hine62
The problem is it won't boot to hatch screen when the top board is attached. I get a screen with garbage graphics in squares. I've looked up the calendar error and checked the power to the top board. The power is only 4.3v, is this too low? It should be 5v.
The battery has been removed and I've checked the traces which were fine. Could the 32.768 crystal be dead? But why would the bottom board boot, but not with the top?
Thanks for your help.
Hine62