Mai_Lover
Dodgeball Yakuza
- Joined
- Nov 29, 2007
- Posts
- 641
I've searched this site for answers and nothing of relevance appeared. If someone has experience with this, I would appreciate your input.
I have two arcade sticks that I wish to customize with overlays. The surface texture is a little coarse (somewhat similar to the X-Arcade but a smoother, finer grain). I have made my design in Photoshop to the dimensions I require. Now all I need is a reputable place to print the adhesive vinyl and laminate it.
The units are good quality with Sanwa innards. The buttons are the push-in type, not the screw-in, so clearance might be an issue if the graphic is too thick. Any help is appreciated. If you know a great place to try, please drop a link. Thanks all.
I have two arcade sticks that I wish to customize with overlays. The surface texture is a little coarse (somewhat similar to the X-Arcade but a smoother, finer grain). I have made my design in Photoshop to the dimensions I require. Now all I need is a reputable place to print the adhesive vinyl and laminate it.
The units are good quality with Sanwa innards. The buttons are the push-in type, not the screw-in, so clearance might be an issue if the graphic is too thick. Any help is appreciated. If you know a great place to try, please drop a link. Thanks all.