Egret II Issues

[MadTitan]

I'm having some trouble with my Egret and hoping someone on here might have some suggestions.

When I put a board in it doesn't seem like power is getting to the board. The LEDs on the board will light up for a second and go out. There is no sound and the screen turns on but stays black. I've tried a couple boards with no luck and they work fine in my MVS cab so i'm not sure whats the problem. The machine was working fine and then stopped a few days ago.

Thanks for any help.

 

[BanishingFlatsAC]

I'm having some trouble with my Egret and hoping someone on here might have some suggestions.

When I put a board in it doesn't seem like power is getting to the board. The LEDs on the board will light up for a second and go out. There is no sound and the screen turns on but stays black. I've tried a couple boards with no luck and they work fine in my MVS cab so i'm not sure whats the problem. The machine was working fine and then stopped a few days ago.

Thanks for any help.

check the output from the power supply.

 

[madman]

Yea, sounds like the power supply needs adjusting, or is possibly on its way out.