As the title states.
Local pick-up only in the Bay Area. Anyone can come by and look at them if they want to.
Payment: Pay Pal or cash. I prefer Pay Pal, so I can send the funds right away to pay off some bills.
This is the best vintage set-up for Beginner/Amateur/Pro audiophiles. With the right receiver your neighbors will be calling the Cops for extreme noise pollution...
Selling as a set only:
I took care of these very carefully. There might be a scratched or two here and there, but that happened during the time I moved. Everything works flawlessly and just needs a little bit of dusting.
2x Floor speakers with powered subs.
1x Center channel
2x Powered subwoofers.
Asking price: $1,000
========================
Specifications
========================
Polk RT200i - Floor speakers with subwoofers.
Driver Complement
Subwoofer 2 - 8" Diameter (20.32cm)
Dynamic Balance® bass drivers, shielded
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
mid/bass driver, shielded
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance® Tri-laminate dome tweeter, shielded
Electrical
Overall Frequency Response 20Hz - 26kHz
Lower -3dB Limit 32Hz
Upper -3dB Limit 25kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 30 - 300 w/channel
Efficiency 90 dB
Inputs Dual (bi-ampable) gold-plated 5-way binding post inputs,Low level (RCA type) subwoofer inputs
Outputs Line level subwoofer output jack on built-in amplifier
Dimensions
Cabinet Size 45-1/2" H x 9-1/2" W x 16-3/4" D
(115.57cm H x 24.13cm W x 42.55cm D)
Footprint Size 11" W x 18-1/2" D
(27.94cm W x 46.99cm D)
Enclosure Type
(mid-high array) Sealed
Enclosure Type
(subwoofer) Vented, Power Port
Subwoofer Amplifier Specs
Power Output 50 watts Continuous Average Output
Dynamic Power Output 100 watts
Power Requirements 120V / 50Hz
Polk CS400i - Center speaker
Driver Complement
Mid/Woofer 2 - 6-1/2" Diameter (16.51cm)
Dynamic Balance® drivers, shielded
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance® Tri-laminate dome, shielded
Electrical
Overall Frequency Response 40Hz - 26kHz
Lower -3dB Limit 50Hz
Upper -3dB Limit 25kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10 - 250 w/channel
Efficiency 91 dB
Inputs Gold-plated 5-way binding posts, biamp/biwire
Dimensions
Cabinet Size 8-5/8" H x 18-3/4" W x 14" D
(21.91cm H x 47.62cm W x 35.56cm D)
Enclosure Type Vented, Power Port
PSW 450 subwoofers.
Driver Complement
Subwoofer 1 - 12" Diameter (30.48cm)
Polymer composite driver
Electrical
Overall Frequency Response 25Hz - 160Hz
Lower -3dB Limit 35Hz
Upper -3dB Limit 125Hz
Crossover
(subwoofer) adjustable, 80Hz - 160Hz
Inputs speaker, line, LFE (unfiltered)
Outputs speaker level (high-pass filtered at 80Hz)
Dimensions
Cabinet Size 17-1/2" H x 15-1/8" W x 19" D
(44.45cm H x 38.42cm W x 48.26cm D)
Radiation Pattern direct
Enclosure Type vented
Power Output 150 watts Continuous Average Output
Dynamic Power Output 300 watts
Local pick-up only in the Bay Area. Anyone can come by and look at them if they want to.
Payment: Pay Pal or cash. I prefer Pay Pal, so I can send the funds right away to pay off some bills.
This is the best vintage set-up for Beginner/Amateur/Pro audiophiles. With the right receiver your neighbors will be calling the Cops for extreme noise pollution...
Selling as a set only:
I took care of these very carefully. There might be a scratched or two here and there, but that happened during the time I moved. Everything works flawlessly and just needs a little bit of dusting.
2x Floor speakers with powered subs.
1x Center channel
2x Powered subwoofers.
Asking price: $1,000
========================
Specifications
========================
Polk RT200i - Floor speakers with subwoofers.
Driver Complement
Subwoofer 2 - 8" Diameter (20.32cm)
Dynamic Balance® bass drivers, shielded
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
mid/bass driver, shielded
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance® Tri-laminate dome tweeter, shielded
Electrical
Overall Frequency Response 20Hz - 26kHz
Lower -3dB Limit 32Hz
Upper -3dB Limit 25kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 30 - 300 w/channel
Efficiency 90 dB
Inputs Dual (bi-ampable) gold-plated 5-way binding post inputs,Low level (RCA type) subwoofer inputs
Outputs Line level subwoofer output jack on built-in amplifier
Dimensions
Cabinet Size 45-1/2" H x 9-1/2" W x 16-3/4" D
(115.57cm H x 24.13cm W x 42.55cm D)
Footprint Size 11" W x 18-1/2" D
(27.94cm W x 46.99cm D)
Enclosure Type
(mid-high array) Sealed
Enclosure Type
(subwoofer) Vented, Power Port
Subwoofer Amplifier Specs
Power Output 50 watts Continuous Average Output
Dynamic Power Output 100 watts
Power Requirements 120V / 50Hz
Polk CS400i - Center speaker
Driver Complement
Mid/Woofer 2 - 6-1/2" Diameter (16.51cm)
Dynamic Balance® drivers, shielded
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance® Tri-laminate dome, shielded
Electrical
Overall Frequency Response 40Hz - 26kHz
Lower -3dB Limit 50Hz
Upper -3dB Limit 25kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10 - 250 w/channel
Efficiency 91 dB
Inputs Gold-plated 5-way binding posts, biamp/biwire
Dimensions
Cabinet Size 8-5/8" H x 18-3/4" W x 14" D
(21.91cm H x 47.62cm W x 35.56cm D)
Enclosure Type Vented, Power Port
PSW 450 subwoofers.
Driver Complement
Subwoofer 1 - 12" Diameter (30.48cm)
Polymer composite driver
Electrical
Overall Frequency Response 25Hz - 160Hz
Lower -3dB Limit 35Hz
Upper -3dB Limit 125Hz
Crossover
(subwoofer) adjustable, 80Hz - 160Hz
Inputs speaker, line, LFE (unfiltered)
Outputs speaker level (high-pass filtered at 80Hz)
Dimensions
Cabinet Size 17-1/2" H x 15-1/8" W x 19" D
(44.45cm H x 38.42cm W x 48.26cm D)
Radiation Pattern direct
Enclosure Type vented
Power Output 150 watts Continuous Average Output
Dynamic Power Output 300 watts
Last edited:
