ColdWolf35
King's Dry Cleaner
- Joined
- Jul 23, 2013
- Posts
- 386
So I recently purchased a Garou: MOTW kit, and cosmetically, everything looked OK (the clear, green divider bothered me a little, since it didn't match the clear cartridge, but I got over it), until I plugged it in to my Neo MVS Magic Key that I got from Razoola. Here's the problem:
When I boot it up, there's no opening screen to change languages like I do with the rest of my MVS games. The screen dims, then brightens, and sound only plays when I slightly pull the converter out of the AES. I even pulled the cartridge out a little also, but white, grey, multi-colored lines still show up.
The MOTW cartridge boards look like the board sets on the MVS scans, except instead of two generic chips in the scans, both are Toshiba ones, but the chips have the same numbers identifying them like the scans. On the KE/KC chip, there's some yellow paint on the top, trying to cover the KC.
I know that it's not the converter, because it works with every other game that I have. The system is an American system, and there's no problem with it either. I cleaned the connectors with a cloth, a gift card, and rubbing alcohol, and no dirt was present on the cloth. The cart pins aren't too bad, so they just look a little hazy. I was looking at other threads that have the same problem, but nothing for the converter. Help is very much appreciated!
http://www.neo-geo.com/forums/showt...ou-MoTW-MVS-Cart&highlight=Garou+MVS+problems
http://www.neo-geo.com/forums/showt...VS-cart-problems&highlight=Garou+MVS+problems
http://www.neo-geo.com/forums/showt...es-Boot-Problems&highlight=Garou+MVS+problems
When I boot it up, there's no opening screen to change languages like I do with the rest of my MVS games. The screen dims, then brightens, and sound only plays when I slightly pull the converter out of the AES. I even pulled the cartridge out a little also, but white, grey, multi-colored lines still show up.
The MOTW cartridge boards look like the board sets on the MVS scans, except instead of two generic chips in the scans, both are Toshiba ones, but the chips have the same numbers identifying them like the scans. On the KE/KC chip, there's some yellow paint on the top, trying to cover the KC.
I know that it's not the converter, because it works with every other game that I have. The system is an American system, and there's no problem with it either. I cleaned the connectors with a cloth, a gift card, and rubbing alcohol, and no dirt was present on the cloth. The cart pins aren't too bad, so they just look a little hazy. I was looking at other threads that have the same problem, but nothing for the converter. Help is very much appreciated!
http://www.neo-geo.com/forums/showt...ou-MoTW-MVS-Cart&highlight=Garou+MVS+problems
http://www.neo-geo.com/forums/showt...VS-cart-problems&highlight=Garou+MVS+problems
http://www.neo-geo.com/forums/showt...es-Boot-Problems&highlight=Garou+MVS+problems