Its posible convert Puzzle Boubble 2 boot into Ghostloop?

[gomados]

Hi guys

im trying to know if i can use my bootleg board of puzzle bobble 2 and eproms and convert
that cart that i finally got original into Ghostlop.

My boards are CHA256 and PROGBK1
and a got various eproms in this cart that maybe i can use:

PROGBK1
3x m27c160 (no windows) into V1-V2-V3
1x M27C800 into V4
1x M27C800 into P1

CHA256
1x M27C512 into M1
1x M27C512 into S1
2x M27C322 into C1-C2
2x M27C800 into C3-C4

I saw tutorials buy im not sure if CHA256 it ok because i read it was required CHA256B.
also read about use of eproms 27c1001 for S1 and M1 so i asume that i have to buy 2.
and finally my m27c160 has no window so they are eeprom or just one time write.

i will post pics of board and cart.

 

[ki_atsushi]

No.

EDIT: I jumped the gun... didn't see that it was a bootleg you're saccing. Please continue...

 

[Tyranix95]

http://www.neo-geo.com/forums/showthread.php?231082-THE-ULTIMATE-11&highlight=

 

[bustedstr8]

You got almost everything you need.

P1=27c800
V1=Split onto two 27c800 and change jumpers for 8Mb
C1/2= two 27c322

So you just need to get...

M1= 27c1001 and change jumpers for 1Mb
S1 = 27c301

150ns or faster

 

[gomados]

Hold your arms pls.... its a bootleg that i never take part on it....

You got almost everything you need.

P1=27c800
V1=Split onto two 27c800 and change jumpers for 8Mb
C1/2= two 27c322

So you just need to get...

M1= 27c1001 and change jumpers for 1Mb
S1 = 27c301

150ns or faster

ok i need 27c301 and 27c1001 i saw that i can use a 27c1001 for 27c301 changing pin 2 and 24.
so maybe with 2 27c1001 will be ok?
do you know any guide for changing board jumpers?

tnx for reply

 

[bustedstr8]

https://wiki.neogeodev.org/index.php?title=CHA256

 

[gomados]

https://wiki.neogeodev.org/index.php?title=CHA256

tnx for link i will need also https://wiki.neogeodev.org/index.php?title=PROGBK1

looking to split v roms board has now jv3+jv4 so i have to change to jv1 + jv2 to use two 27c800?

Largest V ROM Jumper set
8Mbit (1MiB) JV1+JV2
16Mbit (2MiB) JV3+JV4
32Mbit (4MiB) JV5+JV6

 

[Xian Xi]

tnx for link i will need also https://wiki.neogeodev.org/index.php?title=PROGBK1

looking to split v roms board has now jv3+jv4 so i have to change to jv1 + jv2 to use two 27c800?

Largest V ROM Jumper set
8Mbit (1MiB) JV1+JV2
16Mbit (2MiB) JV3+JV4
32Mbit (4MiB) JV5+JV6

Why would you split the V rom, Ghostlop only needs 1 x 27C160. Are the 800s the only chips you have?

 

[gomados]

hi Xian Xi...
only roms that i have are soldered on pics that i posted.
i assume that i have to buy some, i think two 27c1001 will be ok(interchanging pin 2 to 24 and viceversa), but not sure.
and i want to use this bootleg board i dont want to destroy original cart.

ok i see my m27c160 are only one time programable so i need

2 x 27c1001 for M1 and S1
2x 27c160 for V1 and P1

and use my two 27c322 for C1 and C2
and what about jumpers settings?

 

[Tyranix95]

http://www.mvs-scans.com/index.php/Ironclad

http://www.mvs-scans.com/index.php/Ghostlop

 

[gomados]

http://www.mvs-scans.com/index.php/Ironclad

http://www.mvs-scans.com/index.php/Ghostlop

Great Tyranix95!!!!!

Tnx i just have to copy jumpers config and buy those eproms that i need...

edit
ups... for CHA256 board its perfect for but for PROGBK1 board need jumper confing to just useone V1.

 

[bustedstr8]

You have a ProgBK1 not a ProgSC
So you need to pick how your going to do the V1 Rom

P1 is always 27c800
If V1 is 27c160 then leave jumpers
or..
If V1 is split on two 27c800. Move jumpers from JV3+JV4 to JV1+JV2

The CHA256 picture is correct. Move J1+J4 to J2+J3 and do the wire jumpers if you choose to use 27c1001 for S1.

 

[gomados]

You have a ProgBK1 not a ProgSC
So you need to pick how your going to do the V1 Rom

P1 is always 27c800
If V1 is 27c160 then leave jumpers
or..
If V1 is split on two 27c800. Move jumpers from JV3+JV4 to JV1+JV2

The CHA256 picture is correct. Move J1+J4 to J2+J3 and do the wire jumpers if you choose to use 27c1001 for S1.

Great i will buy two 27c1001 and one 27c160 to do the cart
last two things
1. i have to do the wire jumpers to just S1 or S1 and M1?.
edited...(ok i saw on other post that just S1).
2. i you compare my board to the link board you can see that my board its already on j2+j3 so dont have to do nothing but i saw diference on board link its j11+j12 and my board j11+r2.
edited...(ok i saw on other post that have to change also j11+j12 and take off r2).

 

[bustedstr8]

J12 and R2 are for C Roms 3 and 4. Those are unused in a Ghostlop. So...you can leave J11-R2 as is.

 

[gomados]

J12 and R2 is for the second pair of C Roms. Those are unused in a Ghostlop

really tnx i just ordered the eproms, i will post again when arrive and do the flashing!!

 

[gomados]

Finally got eproms!!!

and desoldered bootleg boards!!

burning eproms

soldering burned eproms

doing the s1 trick

GREAT!!!!

Thanks to Eberyone who helped me in this little project.

now i have to reprint the old puzzle booble bootleg cart and changeit to Ghostloop Bootleg!!