- Joined
- Nov 16, 2001
- Posts
- 4,042
last week, i got a few mvs boards in the mail. all the shape of the MV1FZ but some of those boards are MV1A variants. most worked well when i tested them but i have problems with two MV1ACH and one MV1AX board. while one of those three boards is in a terrible physical condition (leaking battery, filth & repaired traces), all three show the same problem. the other two boards are in a decent condition and not too dirty, btw.
here's a video:
other MV1A and MV1FZ viariants work(ed) well with my supergun. none of the caps seem to be leaking. one leg of one cap is ripped off and i didn't get to repair it yet, but still ... the problem is the same with all three boards.
i'm using a sc200 psu with my supergun (5V 4A and 12V 1A, according to the label on the back of the psu).
has anyone seen something like this before and knows how to fix it?
might have to send this one back:
here's a video:
other MV1A and MV1FZ viariants work(ed) well with my supergun. none of the caps seem to be leaking. one leg of one cap is ripped off and i didn't get to repair it yet, but still ... the problem is the same with all three boards.
i'm using a sc200 psu with my supergun (5V 4A and 12V 1A, according to the label on the back of the psu).
has anyone seen something like this before and knows how to fix it?
might have to send this one back: