Question about power draw Axunworks Supergun

[daytonausa]

I'm new to this Axunworks supergun and figured I'd ask before "trying it" and blowing something. Not sure as to its capability.

I have the model that does both JAMMA and JVS. I have my CPS2, MVS and my Naomi, and was curious if I can have the JVS power/USB plugged in at the same time as the JAMMA is connected. Long and short, unsure if this can power on a Naomi and a MVS/CPS2 at the same time or if it'll only power one unit at a time.

Secondly, if it can't run both, if I am running Naomi for example, can I leave the unplugged JAMMA cable (not plugged into MVS but still plugged into supergun) in the supergun or will that draw slight power to the JAMMA cable and rob it from the Naomi?

Thanks.

 

[skate323k137]

I wouldn't try to power both.

As long as the JAMMA loom is not connected on the PCB end when not in use, you can leave it attached to the supergun.

 

[daytonausa]

I wouldn't try to power both.

As long as the JAMMA loom is not connected on the PCB end when not in use, you can leave it attached to the supergun.

Great thanks.