Sound Problems MV2-F Mono -Stereo ?

[Cassius]

Hi, the output on my MV2F is permanently set to stereo (there is no mono on the board) and my supergun is wired as Mono. The ground for the
Mono Super Gun would wire to the Right Stereo Channel for the MV2F I think. would there be any problems just plugging in and playing or will i end up blowing something.
any help would be greatly appreciated.

 

[Arakon]

if it uses speaker- rather than gnd, it'll give you scratchy, skippy sound.
you could just remove the wire there and hook it to GND, but you'll miss the other channel. or just wire the entire thing right for stereo.

 

[Cassius]

Ill be really dumb and ask what gnd means and would the wiring be a hard thing to do.

 

[Arakon]

gnd = ground.. the first and last 2 pins on the jamma connector. it just takes desoldering the wire from one pin and soldering it to another.