I read in some other posts that you connect pin 15 on the H64 board to any ground. First (pardont my ignorance) what is a ground and where is it located. I'm using a super nova so where how would i get to test mode using that. Second. How do you get the 4th button to work on a nova. It says you have to connect a auxiliary connector to a 10 pin adapter cable. What does this mean? I'd appreciate any help.
Test switch and joystick question
- Thread starter Eldios
- Start date
Its the Pin on the jamma harness, not on the H64
on this website you can see the layout of the pins, for example connect pin 15 with pin 28 to make a test switch,
http://freespace.virgin.net/chad.gray/jamma_Info.htm
Pin 25 is the 1p 4th button. what u connect this to on the Nova i dont know without having a look <IMG SRC="smilies/frown.gif" border="0">
on this website you can see the layout of the pins, for example connect pin 15 with pin 28 to make a test switch,
http://freespace.virgin.net/chad.gray/jamma_Info.htm
Pin 25 is the 1p 4th button. what u connect this to on the Nova i dont know without having a look <IMG SRC="smilies/frown.gif" border="0">