WTB: Single Slot MVS.

[Niko]

Hey Guys, recently my MV1C died and I'd like to buy another MVS board to replace it.

I'm looking for a nice, clean, smaller form factor board (MV1B, MV1C, MV-1FZ, etc.).

Let me know if you have one.

 

[JasonToddLives]

I may have an MV-1FZ available, if you're still on the hunt.

 

[Niko]

Bump

 

[Trilla Kangz]

If you don't mind gambling on the condition.
https://www.ebay.com/itm/For-arcade...651372&hash=item25e2551f5b:g:xp8AAOSwFbJZ4F2X

 

[SpamYouToDeath]

If you don't mind gambling on the condition.
https://www.ebay.com/itm/For-arcade...651372&hash=item25e2551f5b:g:xp8AAOSwFbJZ4F2X

I bought one from a Chinese seller on eBay, and it came in with a big "CHINA SALE ONLY" burned into the plastic with a soldering iron. Had to put a few layers of tape over it so it didn't scratch the hell out of my carts. Also, it wasn't the board revision they advertised.

Otherwise, yeah, it's probably worth it to just get 1-slot boards on eBay at this point.

 

[Niko]

Thanks guys, I've actually got one now. It was no easy task.

I first traded a guy offsite a Spin Master for an MV1B. MV1B arrived and had graphical issues . Turned out some of the cart slot pins where fucked and so now I have an MV1B that needs a new cart slot.

Then I decided to buy a lot of (3) working MV-1FZ/S boards I found on KLOV. Those arrived but of course one of them was dead.

So ended up with 4 boards with a 50% success rate.....

 

[Kid Panda]

If you don't mind gambling on the condition.
https://www.ebay.com/itm/For-arcade...651372&hash=item25e2551f5b:g:xp8AAOSwFbJZ4F2X

Some of those boards are bootlegs and it's a crap shoot what you get. A buddy of mine ordered 5 and 3 three were bootlegs.

 

[Tw3ek]

I've got a spare MV-1FZ if you don't wanna chance the bootleg