skate, your Net City has a tri-sync chassis? I thought that was New Net only.
skate, your Net City has a tri-sync chassis? I thought that was New Net only.
Thanks for the word, guys! I guess my Net is an odd bird; it only does 31k.
But yeah, skate-if you don't scoop one from alberto, I might have an extra at friend prices for you.
I gotta sell my AW stuff 1st tho.
I appreciate that. No worries... I already have a frankenloom under the panel that has both the sega connector and a db15 that I use to plug into a PS360+. If I can get a cable through to the bottom part of the cab that will handle controls.
I figure if I can get the right female power connector (8 pin), a line out converter, and a few other cables / connections, I should be able to JAMMA/JVS it myself pretty easily especially being a dedicated 1 player cab. I've never pulled off the side rails or run cables through them so if someone has tips on that let me know (or we can move this to the net city club).
Also for what it's worth both my net cities are tri sync ms-2933's. I believe the USA NAOMI Universal cabs came with the 2932(?) that's 31khz only.
I like how this thread has slowly moved towards Net City cabs.
I have both of these cabinets and I agree with what westcb said. Blast for JAMMA stuff, Vewlix for JVS/HD console use. There will be some hoops you need to jump through to get your consoles working in the Vewlix, but I can give you some pointers since I have my Xbox One in mine
yeah, knock that shit off, guys. start another thread for the N/NCs: The folding chair cab club.
This ^. I can change the yoke wires, but I want the fancy switches.
If it's just two wires, a flip is a really easy circuit with a DPDT switch if you can't find a kit. Fairly certain the wires you'd need to wire it to are documented well in the blast city manual.
Thanks. I thought my post was long forgotten. I'll make my own if I have to, but I was hoping there was still someone out there who produced them to save me some trouble.
not sue if francob still makes them. might want to ping him.
I sent him a PM, but never got a reply.
When I emailed him back in August he told me he was done making all the wiring.
not sue if francob still makes them. might want to ping him.
If I had a NNC, I'd make them. I would, 100%
I've been looking to pick up a spare chassis/monitor for my Blast and came across someone with a Nanao ms 2931 and Rodotron 666B1-29 chassis for sale over on KLOV and we are talking about a sale. As I wait for some pics I thought I'd see if this is exactly what I would need.