WTB: MV2F

[duo_r]

In need of a MV2F, just the PCB, don’t need cover.

 

[NexusX]

For what application?

 

[duo_r]

I have a consolized Neo Geo board but it isn’t working properly.

 

[NexusX]

I have a consolized Neo Geo board but it isn’t working properly.

So you just want to take the parts off of your existing 2 slot and rework a working 2 slot board?

 

[duo_r]

Yes I already have a nice painted cover and stand offs etc. just need a working boards.

So you just want to take the parts off of your existing 2 slot and rework a working 2 slot board?

 

[SuperGun]

Is your current board repairable? (like is it just problems like corrupted sprites or bad sound or a calendar error, etc.) or is it just completely dead, with no picture? Is the battery section nice & clean or corroded? When’s the last time it was changed? (or is it still the factory original battery)

 

[Neo Alec]

http://www.neo-geo.com/forums/showthread.php?277922-Neo-Geo-MV2F-help-needed

Sounds like it's close to working.

 

[duo_r]

I did the coin battery mod, so that isn’t an issue. I seem to have a draw as the voltage line is dropping below 5v.

Is your current board repairable? (like is it just problems like corrupted sprites or bad sound or a calendar error, etc.) or is it just completely dead, with no picture? Is the battery section nice & clean or corroded? When’s the last time it was changed? (or is it still the factory original battery)