- Joined
- Dec 26, 2010
- Posts
- 1,412
We need more submissions in here. Hopefully some have been creating some off the wall CMVS units.
I didnt build off a wall but its attached to parts of a table.
We need more submissions in here. Hopefully some have been creating some off the wall CMVS units.
damn, that is ghetto... what do all those switches do?
Don't get me wrong, there's nothing bad about it... I was merely stating a fact. ^^What's wrong with ghetto?
This is my first attempt at a cmvs ,so here goes.
Finally completed it,painting the case proved to be the most difficult part to get perfect,hence its not.As around one of the sides,i had to remove some of the primer because there was a crappy bubble effect,so you can see a slight difference where the layers of built up primer ,red acrylic gloss and clear coat lacquer don't quite build up the removed primer to give a level finish .
Uni bios 3.0 installed,power status led above the controller ports,battery mod ,5volt mod ,rgb scart ,new braided sleeving over the rgb scart and aes joystick cables,24mm white sanwa buttons ,balltop and a seimitsu dustcap .5mm black gloss acrylic base with round aluminium spacers and the mvs sticker from monkey stickers on ebay.
I'm in the uk and i've been quoted that it would easily be worth £300+ (IF i were to put it up for sale),i asked idchappys.neo.store ,who's also a member on here.
And the dust is now gone.
AES Component, S-Video, Stereo, Unibios, and blue led reset button mods by Xian Xi
View attachment 15577
I take it you get RGB out of the mini din?
Man, fuck that shit. RGB 4lyfe.
Going into a flat screen?
A sony pvm do sound tempting but those things are pretty hard to come by locally.
RF with the channel switcher 4 life.
FTFY
Did this one awhile ago but this is my current CMVS. Nothing super special about it except for the fact that I built it for less than $130 and that includes the Universal BIOS. I still have not put a base on it out of sheer laziness.
Very nice. What did you do for the audio? Old circuit or some kind of amp?