Finally scooped a switch for a reasonable price. Also I got my wife some weird printer thing that she's using to open her own etsy shop. She made this sticker as a test.
It's this one: Silhouette CAMEO 3 Bluetooth Starter Bundle with 12 Oracal 651 Sheets, 12 Siser Glitter/Smooth Easyweed Heat Transfer Sheets, Mimic Transfer Paper, an https://www.amazon.com/dp/B01N7M9GYJ/ref=cm_sw_r_cp_apip_XlCGViERvE4VP
It's this one: Silhouette CAMEO 3 Bluetooth Starter Bundle with 12 Oracal 651 Sheets, 12 Siser Glitter/Smooth Easyweed Heat Transfer Sheets, Mimic Transfer Paper, an https://www.amazon.com/dp/B01N7M9GYJ/ref=cm_sw_r_cp_apip_XlCGViERvE4VP
Technically I bought it but she told me to think of it as investing, alright.
300wins comes to my rescue again with finding a replacement chassis. Took forger to install as I've never swapped a whole chassis before, and I couldn't get it to sync until He pointed out that it was set in 24k mode. Actually got life force to sync now and the geometry is great!
Also got in a Marvel vs Capcom that is a green Hispanic board. Oddly the sound wasn't working so I took it apart to reseat it, and it's on a green Japan A board. Came with feet, clips and a kick harness. All the Hispanic cps2 I've seen have either been yellow or orange. Maybe mainman can chime in with some knowledge.
Very exciting pick up last night. It has been a long time coming and I finally decided to get my toploader RGB modded. I'm going to be selling the frontloader to recoup the cost of the mods on the toploader. Composite, S-Video, and RGB mods on both units and a power LED on the toploader. 3 way color palette switch. Got the 3D printed back plate for the toploader to use the SNES multi out port because it looks so clean.
Very exciting pick up last night. It has been a long time coming and I finally decided to get my toploader RGB modded. I'm going to be selling the frontloader to recoup the cost of the mods on the toploader. Composite, S-Video, and RGB mods on both units and a power LED on the toploader. 3 way color palette switch. Got the 3D printed back plate for the toploader to use the SNES multi out port because it looks so clean.
Very nice.
Not 12 hours after hacking together a hold-down bracket for my Neo 25 CP (as seen here http://www.neo-geo.com/forums/showthread.php?225904-Neo-Candy-Club&p=4211765&viewfull=1#post4211765), the seller messages me saying he found the original brackets in a parts hidey hole he'd forgotten about. Mind you, this was over 2 months since the last time we'd talked and he had promised if he found them, he would send them, but I'd pretty much given up hope at that point. If you guys ever deal with Ryu21 on the KLOV forums, he's a stand-up seller for sure.
And this...well...let's just say I'm eagerly awaiting the arrival of a NAOMI+Net DIMM setup (and a Sun power supply).
^^Those megadeth are some classics. Rust In Peace is still in regular rotation for me, and has been since high school (circa 1993).
It works on a PC in wired mode (Xinput). I've connected my SFC30 up to the PC and messed around with the button configuration app, just for testing purposes, and it worked no problem. Is there some extra trick to getting it to work in MAME...or is your MAME on a non-PC setup?
