Search results

Thats good to know! Would you replace the diodes and caps in that general area? Or are there some that could be across the board? I have a bunch of caps and resistors here, might have to order some diodes. I might put back the charging circuit and get a rechargeable 2032. Would replacing this...

I replaced my battery with a coin cell battery when I first got the board (2F). But it seems the board in power down state drains the battery super quick, usually in a couple weeks or so. I saw some boards have more drain than others. Was looking for advice on what to replace the coin cell with...

Wonder if it's off an old dev build? https://mobile.twitter.com/Dotemu/status/1031512836382580736?ref_src=twsrc%5Etfw%7Ctwcamp%5Etweetembed%7Ctwterm%5E1031512836382580736&ref_url=https%3A%2F%2Fs9e.github.io%2Fiframe%2Ftwitter.min.html%231031512836382580736

Just got a Core Grafx II with an Avenue 3 pad included. When I hold down the II button and press left up or left down it also registers that I am pressing the Run button and pauses the game. Does the same thing on button I but on the right side of the dpad. Button III seems unaffected. Did some...

Plenty of these threads about to pop up I think :glee: I am open to the system type, I would prefer a clean system (no yellowing on pc engine) with a power adapter included. I do not need a controller.

New series of Shmup re releases called, M2 ShotTriggers. http://www.famitsu.com/news/201609/06114656.html

Do you remember the code to get into service menu, i know i have it somewhere , cant find it. I confirmed that H and V sync from VGA is tied together on my cable with a resistor (wouldnt this make it comp sync?). In the manual for the 2950 it has this, So looks like I am ok from that part ?

Looking to buy a VGA to SCART cable that I can run from a pc to a PVM. Trying to find one with the 3.5MM stereo integrated for sound so I can attach to my SCART switch without any extra cable runs. I am not sure how sync is handled on this cable, combined maybe? I do have a LM sync stripper...

Looks pretty cool. Co Op could be a blast online. https://www.youtube.com/watch?v=GV7Z--AFgMU&feature=youtu.be Oops there was a thread already, http://www.neo-geo.com/forums/showthread.php?266567-Windjammers-for-the-next-generation-Disc-Jam

Pretty cool new animation, loved seeing the enemies and the first stage animated! Dialog was pretty bad :O https://www.youtube.com/watch?v=876W253z6KY

Figured I would post this on here in case anyone is looking. Saw another thread on the forum that was really old asking. My battery died in the sega cd so I could no longer save to the cd side backup ram. Pretty simple change. I removed the old battery and then soldered lines off the...

I bought a 2930 and 2931 for my Blast City and received them today. Had a couple questions and just looking for advice of what I should inspect on these. I might try to hook them up , not sure if I feel that brave yet :O First up, jsut want to confirm the part numbers are correct 2930...

Gathering all my parts to build a CMVS off a MV-1C. I have already set the board up for stereo and was wondering what din output and cable people use? Since the aes and genesis use the headphone port as a stereo breakout. Is there a DIN i can use where I can pick up a pre made scart cable that...

Looking for an ESR meter, saw these cheaper ones on ebay and amazon. Anyone know anything about these or have any suggestions for a good meter that isnt super expensive...

Been trying to get one of these on eBay and the price has gone nuts. Looking for pre nutso price of 125 in good shape.

Been looking for some stools for my candy cab for a while, I have just been using chairs which work fine. I found these little stools at Ollie's for 5 bucks each (multiple colors) and decided to make cushions for them. First I had to cut some wood to make a bottom and then some 2 Inch foam...

I am doing a cap replacement on my Turbo Duo and when I removed this SMD it was pretty bad underneath. I tried cleaning with isopropyl but it didnt do much. What are my options here? I have done much with SMDs, can i just scrape off where the pad was and solder to copper underneath?

Looking to pick up a desoldering gun and was wondering if anyone had any experience with this one, http://www.amazon.com/Aoyue-Digital-Desoldering-Station-Built-/dp/B00ABJ4AEC/ref=sr_1_2?ie=UTF8&qid=1430404068&sr=8-2&keywords=hakko+desoldering The reviews seem great on it. I was going to do a...

So a couple months ago Raspberry Pi 2 came out which has more oomph and is better for emulation. I was thinking of building a small emulation machine using one plus a JPac to use in my Blast City. Mainly to play some older console stuff and one off boards, like In the Hunt so i don't have to...